Tabla de contenidos
This appendix helps you port MySQL to other operating systems. Do check the list of currently supported operating systems first. See Sección 2.1.1, “Sistemas operativos que MySQL soporta”. If you have created a new port of MySQL, please let us know so that we can list it here and on our Web site (http://www.mysql.com/), recommending it to other users.
Note: If you create a new port of MySQL, you are free to copy and distribute it under the GPL license, but it does not make you a copyright holder of MySQL.
A working POSIX thread library is needed for the server. On Solaris
2.5 we use Sun PThreads (the native thread support in 2.4 and
earlier versions is not good enough), on Linux we use LinuxThreads
by Xavier Leroy,
The hard part of porting to a new Unix variant without good native
thread support is probably to port MIT-pthreads. See
mit-pthreads/README and Programming POSIX
Up to MySQL 4.0.2, the MySQL distribution included a patched version of Chris Provenzano's Pthreads from MIT (see the MIT Pthreads Web page at http://www.mit.edu/afs/sipb/project/pthreads/ and a programming introduction at http://www.mit.edu:8001/people/proven/IAP_2000/). These can be used for some operating systems that do not have POSIX threads. See Sección 2.8.5, “Notas sobre MIT-pthreads”.
It is also possible to use another user level thread package named FSU Pthreads (see http://moss.csc.ncsu.edu/~mueller/pthreads/). This implementation is being used for the SCO port.
thr_alarm.c programs in the
mysys directory for some tests/examples of
Both the server and the client need a working C++ compiler. We use gcc on many platforms. Other compilers that are known to work are SPARCworks, Sun Forte, Irix cc, HP-UX aCC, IBM AIX xlC_r), Intel ecc/icc and Compaq cxx).
To compile only the client use ./configure --without-server.
There is currently no support for only compiling the server, nor is it likely to be added unless someone has a good reason for it.
If you want/need to change any
Makefile or the
configure script you also need GNU Automake and Autoconf. See
Sección 2.8.3, “Instalar desde el árbol de código fuente de desarrollo”.
All steps needed to remake everything from the most basic files.
/bin/rm */.deps/*.P /bin/rm -f config.cache aclocal autoheader aclocal automake autoconf ./configure --with-debug=full --prefix='your installation directory' # The makefiles generated above need GNU make 3.75 or newer. # (called gmake below) gmake clean all install init-db
If you run into problems with a new port, you may have to do some debugging of MySQL! See Sección D.1, “Depurar un servidor MySQL”.
Note: Before you start debugging
mysqld, first get the test programs
mysys/thr_lock to work. This ensures that your
thread installation has even a remote chance to work!
If you are using some functionality that is very new in MySQL, you
can try to run mysqld with the
--skip-new (which disables all new, potentially
unsafe functionality) or with
disables a lot of optimization that may cause problems. See
Sección A.4.2, “Qué hacer si MySQL sigue fallando (crashing)”.
If mysqld doesn't want to start, you should
verify that you don't have any
that interfere with your setup! You can check your
my.cnf arguments with mysqld
--print-defaults and avoid using them by starting with
mysqld --no-defaults ....
If mysqld starts to eat up CPU or memory or if it “hangs,” you can use mysqladmin processlist status to find out if someone is executing a query that takes a long time. It may be a good idea to run mysqladmin -i10 processlist status in some window if you are experiencing performance problems or problems when new clients can't connect.
The command mysqladmin debug dumps some information about locks in use, used memory and query usage to the MySQL log file. This may help solve some problems. This command also provides some useful information even if you haven't compiled MySQL for debugging!
If the problem is that some tables are getting slower and slower
you should try to optimize the table with
TABLE or myisamchk. See
Capítulo 5, Administración de bases de datos. You should also
check the slow queries with
You should also read the OS-specific section in this manual for problems that may be unique to your environment. See Sección 2.12, “Notas específicas sobre sistemas operativos”.
If you have some very specific problem, you can always try to
debug MySQL. To do this you must configure MySQL with the
--with-debug or the
--with-debug=full option. You can check
whether MySQL was compiled with debugging by doing:
mysqld --help. If the
--debug flag is listed with the options then
you have debugging enabled. mysqladmin ver
also lists the mysqld version as
mysql ... --debug in this case.
If you are using gcc or egcs, the recommended configure line is:
CC=gcc CFLAGS="-O2" CXX=gcc CXXFLAGS="-O2 -felide-constructors \ -fno-exceptions -fno-rtti" ./configure --prefix=/usr/local/mysql \ --with-debug --with-extra-charsets=complex
This avoids problems with the
library and with C++ exceptions (many compilers have problems
with C++ exceptions in threaded code) and compile a MySQL
version with support for all character sets.
If you suspect a memory overrun error, you can configure MySQL
--with-debug=full, which installs a
memory allocation (
However, running with
SAFEMALLOC is quite
slow, so if you get performance problems you should start
mysqld with the
--skip-safemalloc option. This disables the
memory overrun checks for each call to
If mysqld stops crashing when you compile it
--with-debug, you probably have found a
compiler bug or a timing bug within MySQL. In this case, you can
try to add
-g to the
variables above and not use
mysqld dies, you can at least attach to it
with gdb or use gdb on the
core file to find out what happened.
When you configure MySQL for debugging you automatically enable
a lot of extra safety check functions that monitor the health of
mysqld. If they find something
“unexpected,” an entry is written to
stderr, which safe_mysqld
directs to the error log! This also means that if you are having
some unexpected problems with MySQL and are using a source
distribution, the first thing you should do is to configure
MySQL for debugging! (The second thing is to send mail to a
MySQL mailing list and ask for help. See
Sección 22.214.171.124, “Las listas de correo de MySQL”. Please use the
mysqlbug script for all bug reports or
questions regarding the MySQL version you are using!
In the Windows MySQL distribution,
is by default compiled with support for trace files.
If the mysqld server doesn't start or if you can cause it to crash quickly, you can try to create a trace file to find the problem.
To do this, you must have a mysqld that has
been compiled with debugging support. You can check this by
mysqld -V. If the version number
-debug, it's compiled with support
for trace files. (On Windows, the debugging server is named
mysqld-debug rather than
mysqld as of MySQL 4.1.)
Start the mysqld server with a trace log in
/tmp/mysqld.trace on Unix or
C:\mysqld.trace on Windows:
shell> mysqld --debug
On Windows, you should also use the
--standalone flag to not start
mysqld as a service. In a console window, use
C:\> mysqld-debug --debug --standalone
After this, you can use the
command-line tool in a second console window to reproduce the
problem. You can stop the mysqld server with
Note that the trace file become very big! If you want to generate a smaller trace file, you can use debugging options something like this:
This only prints information with the most interesting tags to the trace file.
If you make a bug report about this, please only send the lines from the trace file to the appropriate mailing list where something seems to go wrong! If you can't locate the wrong place, you can ftp the trace file, together with a full bug report, to ftp://ftp.mysql.com/pub/mysql/upload/ so that a MySQL developer can take a look a this.
The trace file is made with the DBUG package by Fred Fish. See Sección D.3, “El paquete DBUG”.
On most systems you can also start mysqld from gdb to get more information if mysqld crashes.
With some older gdb versions on Linux you
run --one-thread if you want to be
able to debug mysqld threads. In this case,
you can only have one thread active at a time. We recommend you
to upgrade to gdb 5.1 ASAP as thread debugging works much better
with this version!
NTPL threads (the new thread library on Linux) may cause problems while running mysqld under gdb. Some symptoms are:
mysqld hangs during startup (before it
ready for connections).
mysqld crashes during a
In this case you should set the following environment variable in the shell before starting gdb:
LD_ASSUME_KERNEL=2.4.1 export LD_ASSUME_KERNEL
When running mysqld under
gdb, you should disable the stack trace with
--skip-stack-trace to be able to catch
segfaults within gdb.
In MySQL 4.0.14 and above you should use the
--gdb option to mysqld. This installs an
interrupt handler for
SIGINT (needed to stop
^C to set
breakpoints) and disable stack tracing and core file handling.
It's very hard to debug MySQL under gdb if
you do a lot of new connections the whole time as
gdb doesn't free the memory for old threads.
You can avoid this problem by starting mysqld
-O thread_cache_size= 'max_connections
+1'. In most cases just using
thread_cache_size=5' helps a lot!
If you want to get a core dump on Linux if
mysqld dies with a SIGSEGV signal, you can
start mysqld with the
--core-file option. This core file can be
used to make a backtrace that may help you find out why
shell> gdb mysqld core gdb> backtrace full gdb> exit
If you are using gdb 4.17.x or above on
Linux, you should install a
.gdb file, with
the following information, in your current directory:
set print sevenbit off handle SIGUSR1 nostop noprint handle SIGUSR2 nostop noprint handle SIGWAITING nostop noprint handle SIGLWP nostop noprint handle SIGPIPE nostop handle SIGALRM nostop handle SIGHUP nostop handle SIGTERM nostop noprint
If you have problems debugging threads with gdb, you should download gdb 5.x and try this instead. The new gdb version has very improved thread handling!
Here is an example how to debug mysqld:
shell> gdb /usr/local/libexec/mysqld gdb> run ... backtrace full # Do this when mysqld crashes
Include the above output in a mail generated with mysqlbug and mail this to the general MySQL mailing list. See Sección 126.96.36.199, “Las listas de correo de MySQL”.
If mysqld hangs you can try to use some
system tools like
/usr/proc/bin/pstack to examine where
mysqld has hung.
strace /tmp/log libexec/mysqld
If you are using the Perl
DBI interface, you
can turn on debugging information by using the
trace method or by setting the
DBI_TRACE environment variable.
On some operating systems, the error log contains a stack trace
if mysqld dies unexpectedly. You can use this
to find out where (and maybe why) mysqld
died. See Sección 5.10.1, “El registro de errroes (Error Log)”. To get a stack trace, you
must not compile mysqld with the
-fomit-frame-pointer option to gcc. See
Sección D.1.1, “Compilación de MySQL para depuración”.
If the error file contains something like the following:
mysqld got signal 11; The manual section 'Debugging a MySQL server' tells you how to use a stack trace and/or the core file to produce a readable backtrace that may help in finding out why mysqld died Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack range sanity check, ok, backtrace follows 0x40077552 0x81281a0 0x8128f47 0x8127be0 0x8127995 0x8104947 0x80ff28f 0x810131b 0x80ee4bc 0x80c3c91 0x80c6b43 0x80c1fd9 0x80c1686
you can find where mysqld died by doing the following:
Copy the preceding numbers to a file, for example
Make a symbol file for the mysqld server:
nm -n libexec/mysqld > /tmp/mysqld.sym
Note that most MySQL binary distributions (except for the
"debug" packages, where this information is included inside
of the binaries themselves) ship with the above file, named
mysqld.sym.gz. In this case, you can
simply unpack it by doing:
gunzip < bin/mysqld.sym.gz > /tmp/mysqld.sym
resolve_stack_dump -s /tmp/mysqld.sym -n
This prints out where mysqld died. If this doesn't help you find out why mysqld died, you should make a bug report and include the output from the above command with the bug report.
Note however that in most cases it does not help us to just have a stack trace to find the reason for the problem. To be able to locate the bug or provide a workaround, we would in most cases need to know the query that killed mysqld and preferable a test case so that we can repeat the problem! See Sección 188.8.131.52, “Cómo informar de bugs y problemas”.
Note that before starting mysqld with
--log you should check all your tables with
Capítulo 5, Administración de bases de datos.
If mysqld dies or hangs, you should start
mysqld dies again, you can examine the end of
the log file for the query that killed
If you are using
--log without a file name,
the log is stored in the database directory as
most cases it is the last query in the log file that killed
mysqld, but if possible you should verify
this by restarting mysqld and executing the
found query from the mysql command-line
tools. If this works, you should also test all complicated
queries that didn't complete.
You can also try the command
EXPLAIN on all
SELECT statements that takes a long time to
ensure that mysqld is using indexes properly.
See Sección 7.2.1, “Sintaxis de
EXPLAIN (Obtener información acerca de un
You can find the queries that take a long time to execute by
starting mysqld with
Sección 5.10.4, “El registro de consultas lentas (Slow Query Log)”.
If you find the text
mysqld restarted in the
error log file (normally named
hostname.err) you probably have found a
query that causes mysqld to fail. If this
happens, you should check all your tables with
Capítulo 5, Administración de bases de datos), and test the
queries in the MySQL log files to see if one doesn't work. If
you find such a query, try first upgrading to the newest MySQL
version. If this doesn't help and you can't find anything in the
mysql mail archive, you should report the bug
to a MySQL mailing list. The mailing lists are described at
http://lists.mysql.com/, which also has links to
online list archives.
If you have started mysqld with
myisam-recover, MySQL automatically checks
and tries to repair
MyISAM tables if they are
marked as 'not closed properly' or 'crashed'. If this happens,
MySQL writes an entry in the
'Warning: Checking table ...' which is
Warning: Repairing table if the
table needs to be repaired. If you get a lot of these errors,
without mysqld having died unexpectedly just
before, then something is wrong and needs to be investigated
further. See Sección 5.3.1, “Opciones del comando mysqld”.
It's not a good sign if mysqld did die
unexpectedly, but in this case one shouldn't investigate the
Checking table... messages but instead try to
find out why mysqld died.
If you get corrupted tables or if mysqld always fails after some update commands, you can test whether this bug is reproducible by doing the following:
Take down the MySQL daemon (with mysqladmin shutdown).
Make a backup of the tables (to guard against the very unlikely case that the repair does something bad).
Check all tables with myisamchk -s
database/*.MYI. Repair any wrong tables with
Make a second backup of the tables.
Remove (or move away) any old log files from the MySQL data directory if you need more space.
Start mysqld with
Sección 5.10.3, “El registro binario (Binary Log)”. If you want to find a query
that crashes mysqld, you should use
When you have gotten a crashed table, stop the
Restore the backup.
Restart the mysqld server
Re-execute the commands with mysqlbinlog
update-log-file | mysql. The update log is saved
in the MySQL database directory with the name
If the tables are corrupted again or you can get mysqld to die with the above command, you have found reproducible bug that should be easy to fix! FTP the tables and the binary log to ftp://ftp.mysql.com/pub/mysql/upload/ and enter it into our bugs system at http://bugs.mysql.com/. If you are a support customer, you can use the MySQL Customer Support Center https://support.mysql.com/ to alert the MySQL team about the problem and have it fixed as soon as possible.
You can also use the script
to just execute some of the update statements if you want to
narrow down the problem.
To be able to debug a MySQL client with the integrated debug
package, you should configure MySQL with
Sección 2.8.2, “Opciones típicas de configure”.
Before running a client, you should set the
MYSQL_DEBUG environment variable:
shell> MYSQL_DEBUG=d:t:O,/tmp/client.trace shell> export MYSQL_DEBUG
This causes clients to generate a trace file in
If you have problems with your own client code, you should attempt to connect to the server and run your query using a client that is known to work. Do this by running mysql in debugging mode (assuming that you have compiled MySQL with debugging on):
shell> mysql --debug=d:t:O,/tmp/client.trace
This provides useful information in case you mail a bug report. See Sección 184.108.40.206, “Cómo informar de bugs y problemas”.
If your client crashes at some 'legal' looking code, you should
check that your
mysql.h include file matches
your MySQL library file. A very common mistake is to use an old
mysql.h file from an old MySQL installation
with new MySQL library.
The MySQL server and most MySQL clients are compiled with the DBUG package originally created by Fred Fish. When you have configured MySQL for debugging, this package makes it possible to get a trace file of what the program is debugging. See Sección D.1.2, “Crear ficheros de traza”.
This section summaries the argument values that you can specify in
debug options on the command line for MySQL programs that have
been built with debugging support. For more information about
programming with the DBUG package, see the DBUG manual in the
dbug directory of MySQL source distributions.
It's best to use a recent distribution for MySQL 5.0 to get the
most updated DBUG manual.
You use the debug package by invoking a program with the
--debug="..." or the
Most MySQL programs have a default debug string that is used if
you don't specify an option to
default trace file is usually
/tmp/program_name.trace on Unix and
\program_name.trace on Windows.
The debug control string is a sequence of colon-separated fields as follows:
Each field consists of a mandatory flag character followed by an
,' and comma-separated list of
The currently recognized flag characters are:
|Enable output from DBUG_<N> macros for the current state. May be followed by a list of keywords which selects output only for the DBUG macros with that keyword. An empty list of keywords implies output for all macros.|
|Delay after each debugger output line. The argument is the number of
tenths of seconds to delay, subject to machine
capabilities. For example, |
|Limit debugging and/or tracing, and profiling to the list of named
functions. Note that a null list disables all functions.
The appropriate |
|Identify the source file name for each line of debug or trace output.|
|Identify the process with the PID or thread ID for each line of debug or trace output.|
|Enable profiling. Create a file called |
|Identify the source file line number for each line of debug or trace output.|
|Print the current function nesting depth for each line of debug or trace output.|
|Number each line of debug output.|
|Redirect the debugger output stream to the specified file. The default
output is |
|Limit debugger actions to specified processes. A process must be
identified with the |
|Print the current process name for each line of debug or trace output.|
|When pushing a new state, do not inherit the previous state's function nesting level. Useful when the output is to start at the left margin.|
|Do function |
|Enable function call/exit trace lines. May be followed by a list (containing only one modifier) giving a numeric maximum trace level, beyond which no output occurs for either debugging or tracing macros. The default is a compile time option.|
Some examples of debug control strings that might appear on a
shell command line (the
-# is typically used to
introduce a control string to an application program) are:
-#d:t -#d:f,main,subr1:F:L:t,20 -#d,input,output,files:n -#d:t:i:O,\\mysqld.trace
In MySQL, common tags to print (with the
I have tried to use the RTS thread packages with MySQL but stumbled on the following problems:
They use old versions of many POSIX calls and it is very tedious to make wrappers for all functions. I am inclined to think that it would be easier to change the thread libraries to the newest POSIX specification.
Some wrappers are currently written. See
mysys/my_pthread.c for more info.
At least the following should be changed:
pthread_get_specific should use one argument.
sigwait should take two arguments. A lot of
functions (at least
pthread_cond_timedwait()) should return the
error code on error. Now they return -1 and set
Another problem is that user-level threads use the
ALRM signal and this aborts a lot of functions
open...). MySQL should do a retry on interrupt
on all of these but it is not that easy to verify it.
The biggest unsolved problem is the following:
To get thread-level alarms I changed
mysys/thr_alarm.c to wait between alarms with
pthread_cond_timedwait(), but this aborts with
EINTR. I tried to debug the thread
library as to why this happens, but couldn't find any easy
If someone wants to try MySQL with RTS threads I suggest the following:
Change functions MySQL uses from the thread library to POSIX. This shouldn't take that long.
Compile all libraries with the
If there are some small differences in the implementation,
they may be fixed by changing
thr_alarm. If it runs without any
“warning,” “error,” or aborted
messages, you are on the right track. Here is a successful run
Main thread: 1 Thread 0 (5) started Thread: 5 Waiting process_alarm Thread 1 (6) started Thread: 6 Waiting process_alarm process_alarm thread_alarm Thread: 6 Slept for 1 (1) sec Thread: 6 Waiting process_alarm process_alarm thread_alarm Thread: 6 Slept for 2 (2) sec Thread: 6 Simulation of no alarm needed Thread: 6 Slept for 0 (3) sec Thread: 6 Waiting process_alarm process_alarm thread_alarm Thread: 6 Slept for 4 (4) sec Thread: 6 Waiting process_alarm thread_alarm Thread: 5 Slept for 10 (10) sec Thread: 5 Waiting process_alarm process_alarm thread_alarm Thread: 6 Slept for 5 (5) sec Thread: 6 Waiting process_alarm process_alarm ... thread_alarm Thread: 5 Slept for 0 (1) sec end
MySQL is very dependent on the thread package used. So when choosing a good platform for MySQL, the thread package is very important.
There are at least three types of thread packages:
User threads in a single process. Thread switching is managed with alarms and the threads library manages all non-thread-safe functions with locks. Read, write and select operations are usually managed with a thread-specific select that switches to another thread if the running threads have to wait for data. If the user thread packages are integrated in the standard libs (FreeBSD and BSDI threads) the thread package requires less overhead than thread packages that have to map all unsafe calls (MIT-pthreads, FSU Pthreads and RTS threads). In some environments (for example, SCO), all system calls are thread-safe so the mapping can be done very easily (FSU Pthreads on SCO). Downside: All mapped calls take a little time and it's quite tricky to be able to handle all situations. There are usually also some system calls that are not handled by the thread package (like MIT-pthreads and sockets). Thread scheduling isn't always optimal.
User threads in separate processes. Thread switching is done by the kernel and all data are shared between threads. The thread package manages the standard thread calls to allow sharing data between threads. LinuxThreads is using this method. Downside: Lots of processes. Thread creating is slow. If one thread dies the rest are usually left hanging and you must kill them all before restarting. Thread switching is somewhat expensive.
Kernel threads. Thread switching is handled by the thread library or the kernel and is very fast. Everything is done in one process, but on some systems, ps may show the different threads. If one thread aborts, the whole process aborts. Most system calls are thread-safe and should require very little overhead. Solaris, HP-UX, AIX and OSF/1 have kernel threads.
In some systems kernel threads are managed by integrating user level threads in the system libraries. In such cases, the thread switching can only be done by the thread library and the kernel isn't really “thread aware.”
Ésta es una traducción del manual de referencia de MySQL, que puede encontrarse en dev.mysql.com. El manual de referencia original de MySQL está escrito en inglés, y esta traducción no necesariamente está tan actualizada como la versión original. Para cualquier sugerencia sobre la traducción y para señalar errores de cualquier tipo, no dude en dirigirse a email@example.com.